How Do I Find Out What’s Wrong With My Furnace?

Understanding common furnace failures is essential for homeowners to stay ahead of potential furnace repair issues. A malfunctioning furnace can quickly turn into an expensive headache if not addressed. Here are the most frequent problems you might encounter:

Ignition System Problems

Furnace ignition systems, whether traditional pilot lights or modern electronic ignitions, are prone to failure from dust buildup or general wear and tear. When this happens, your furnace won’t produce heat, and in some cases, it could present safety risks. Regular cleaning and professional inspections help ensure proper ignition and reduce malfunctions.

Clogged Filters

Dusty, clogged filters reduce airflow, forcing your furnace to overwork. This strain can lead to overheating or cause the system to shut down altogether. Regularly replacing filters not only boosts efficiency but also improves indoor air quality and prevents larger mechanical issues.

Thermostat Malfunctions

A malfunctioning thermostat can throw off your entire heating system by preventing the furnace from cycling correctly or causing it to run continuously. Simple steps like replacing batteries or recalibrating the thermostat can resolve minor issues, but persistent problems may require professional repair or replacement.

Dirty Burners

Burners coated in soot or debris affect heat distribution and can lead to shutdowns or dangerous incomplete combustion. Regular maintenance and burner cleanings ensure safe, efficient operation, minimizing heating inconsistencies and safety hazards.

Flame Sensor Issues

The flame sensor detects if a flame is present during operation. When dirty or faulty, it can shut off the furnace unnecessarily. Cleaning or replacing the sensor helps prevent premature shutdowns and ensures the furnace runs as intended.

Blower Capacitor Failure

A failing blower capacitor can prevent the blower motor from circulating warm air, reducing the system’s effectiveness. If airflow seems weak or non-existent, the capacitor may need to be replaced to restore proper operation.

Limit Switch Malfunctions

The limit switch prevents overheating by shutting down the burners if the furnace becomes too hot. A faulty switch can disrupt the heating cycle, causing either overheating or irregular shutdowns. Replacing this part is essential for maintaining safe and efficient furnace operation.

Blocked Or Leaky Ducts

Leaky or obstructed ductwork prevents proper airflow, leading to uneven heating and increased strain on the furnace. Inspecting ducts regularly and sealing leaks ensures that warm air is distributed efficiently throughout your home.

Gas Supply Issues

Problems with gas valves or supply lines can prevent the furnace from igniting. This issue is critical and requires immediate professional attention to ensure safe and effective furnace operation.

Routine maintenance and prompt attention to these common problems can save you from more expensive repairs down the road. Trust the experts at B&W to keep your home warm, safe, and running efficiently.

How Do You Diagnose A Furnace Problem?

Diagnosing furnace problems can feel overwhelming, but breaking it down step by step makes it manageable. Before you call a technician, try these simple DIY troubleshooting techniques. Often, small adjustments can restore your furnace’s function and save you time and money. Let’s walk through the process to help you get the heat flowing again.

Step 1: Check The Thermostat

Start simple. Make sure the thermostat is switched to “heat” mode—this might seem obvious, but it’s easy to overlook.
Adjust the temperature a few degrees above the current room reading to see if the furnace kicks on.
Replace the batteries if the display screen looks faint or blank. A weak battery can interrupt communication between the thermostat and the furnace.
If the screen stays blank, double-check that the circuit breaker hasn’t tripped. Sometimes, a quick battery swap or recalibration is all it takes to get things running smoothly.

Step 2: Inspect The Power Supply

Head to your breaker box. Locate the circuit labeled for the furnace and see if it’s tripped. If so, flip it back on and try running the furnace again.
Look for a power switch near the furnace itself—sometimes it’s switched off by accident during routine maintenance or cleaning.
If the furnace still doesn’t turn on, there may be a deeper electrical issue that needs professional attention.

Step 3: Examine The Air Filters

Pull out the air filter and hold it up to a light source. If little to no light passes through, the filter is likely clogged with dust and debris.
A dirty filter blocks airflow, causing the furnace to overheat or shut down. Replace the filter if it’s dirty—this is one of the easiest and most effective ways to improve your furnace’s performance.
Make it a habit to check filters every 30 days during peak heating months.

Step 4: Listen For Unusual Noises

Your furnace has a language of its own. Strange noises can often give you clues about what’s wrong.
Banging or popping could mean the burners are dirty and igniting late.
Squealing or screeching usually signals a worn blower belt or motor bearings.
Rattling might just be loose panels, but it could also point to internal parts vibrating loose.
If noises persist, schedule a professional inspection.

Step 5: Inspect The Flame Sensor

Turn off the power and locate the flame sensor.
Gently clean it with fine sandpaper or a cloth.
A clean sensor prevents unnecessary shutdowns.

Step 6: Use A Multimeter To Test Components

Set the multimeter to continuity or resistance (Ω). If testing for voltage, set it to AC voltage (120V or 240V).
Test the blower motor, capacitor, and transformer. If there is no continuity or the voltage is off, the component may need replacement.
⚠️ Important: If unsure, call a professional to avoid injury or damage.

How Much Does It Cost To Diagnose A Furnace?

One of the most common questions we hear is, “How much will it cost to diagnose my furnace?” It’s a fair question—nobody likes surprise expenses, especially when it comes to essential home systems. Let’s break down what goes into furnace diagnostic costs and what to expect.

Typical Diagnosis Fees

On average, diagnosing a furnace issue can cost between $0 and $300. This fee covers the technician’s time, expertise, and the tools required to inspect your system. At B&W Heating, Cooling, Plumbing and Electric, we believe in transparent pricing and clear communication. Our goal is to ensure that you know exactly what to expect, with no hidden fees or surprises.

Factors Influencing The Cost

Several factors can impact the final cost of diagnosis. Complex problems that require in-depth testing or disassembly may drive up the price. The time of year can also play a role—during the busy winter season and depending on the company, demand for heating services can affect pricing. That said, addressing furnace problems early can prevent more costly repairs down the road.

Importance Of Professional Inspection

While DIY troubleshooting can help, professional inspections provide a more thorough evaluation. A trained technician can spot problems that may not be immediately obvious, helping you avoid future breakdowns. For example, one of the most challenging scenarios is when there are multiple simultaneous issues—an easily spotted issue may be covering up a more advanced problem. In the end, investing in professional diagnostics means peace of mind and a better-functioning furnace. While Google and YouTube are fantastic resources, it’s important for you to recognize once you’re in over your head. Rather than risk damaging your home or getting injured in the process, call a professional if the problem and solution aren’t immediately obvious.

Cost-Effectiveness Of Regular Maintenance

One of the best ways to keep diagnostic costs low is through regular maintenance. Scheduled tune-ups with B&W ensure your furnace is running efficiently and help catch potential problems before they escalate. In the long run, maintenance saves you money by extending the life expectancy of a furnace and improving overall performance.

What Fails First On A Furnace?

Some furnace components endure more stress than others, making them more likely to fail first. Knowing which parts are most vulnerable can help you stay ahead of breakdowns and costly repairs.

1. Heat Exchanger

The heat exchanger transfers heat from combustion to the air in your home. Constant exposure to high temperatures can cause cracks over time, leading to carbon monoxide leaks. If you notice unusual smells or a triggered carbon monoxide detector, turn off the furnace and call a professional immediately.

2. Blower Motor

The blower motor pushes heated air through your home’s ducts. Signs of failure include weak airflow, rattling noises, or the blower not turning on. Regular cleaning and lubrication help extend the motor’s life.

3. Flame Sensor Or Ignition System

Dirt and debris can cause the flame sensor to malfunction, leading to frequent shutdowns. If your furnace turns on but quickly shuts off, cleaning the sensor often resolves the issue.

4. Limit Switch

This safety device prevents overheating but can wear out if the furnace overheats frequently. A faulty switch may cause the furnace to shut down too often or not operate at all.

5. Belts And Bearings

Worn belts and bearings can cause noisy operation or blower failure. Replacing belts and lubricating bearings during routine maintenance prevents further damage.

By addressing these common points of failure early, you can extend your furnace’s lifespan and avoid major repairs. Routine maintenance is key to ensuring consistent warmth and safety.

Ensuring Efficient Furnace Operation

A well-maintained furnace is essential for keeping your home warm and safe throughout the winter. By staying ahead of common failures, regularly checking key components, and addressing issues early, you can prevent costly breakdowns and extend the lifespan of your heating system. Simple DIY troubleshooting can often resolve minor problems, but for more complex issues, professional expertise is invaluable.

At B&W Heating, Cooling, Plumbing and Electric, we’re committed to providing top-tier service that keeps your furnace running at peak efficiency. As part of our membership program, customers receive free diagnostics on all HVAC issues, priority scheduling during peak seasons, and exclusive discounts on repairs and new installations.

Don’t wait for small problems to escalate—be proactive about your furnace’s health. Schedule your seasonal maintenance today and experience the peace of mind that comes from knowing your home will stay warm, safe, and efficient no matter how cold it gets outside.

Call B&W Heating, Cooling, Plumbing and Electric today to sign up for our membership program and enjoy hassle-free furnace care year-round.